Description
Ultraspec EasyAlign can perform CSI's "SWEEP" method, using the inclinometers, the UltraSpec automatically collects alignment measurements throughout the shaft rotation. This creates a better picture of the actual shaft rotation than the conventional four point method for great accuracy.
Plus there is no need to stop the shaft at specified locations. Start anywhere. Stop anywhere. The alignment solution can be calculated with less that one quarter turn of the shaft.
Furthermore, the "SWEEP" method allows the user to make "cableless" measurements. Simply disconnect the cables, rotate the laser heads, and then reconnect the cables to transmit the data.
EasyAlign also provides the user with optional PC documentation.
UltraSpec also provides powerful tools. Advanced soft foot detection helps to identify distortions in the machine frame as a pre-alignment check. Invalid data generates a user alert indicating potential mechanical problems, such as severe bearing wear, looseness, or shaft rubs, so the overall machine condition can be addressed while it is out of operation.
|